Residential · IHP Geyser®
Hot water all day, on less power than your kettle.
An integrated heat-pump geyser that moves heat from the air into your water. Up to 85% less electricity, up to 75 °C, controlled from your phone.
- Power consumption
- 0.6 kW
- Max water temperature
- 75 °C
- EU energy rating
- A+
- Warranty
- 10 yrs
01How it works
How it heats without burning electricity
A conventional geyser makes heat with a 3–4 kW element. The IHP Geyser® collects heat that is already in the air and moves it into your water.
-
01
Draw in air
A built-in fan pulls in surrounding air — even on a cold day it holds usable heat.
-
02
Absorb the heat
Refrigerant in the evaporator soaks up that warmth and turns to vapour.
-
03
Compress
The GMCC-Toshiba compressor squeezes the vapour, pushing its temperature up.
-
04
Heat the water
Heat transfers into the tank — up to 75 °C — and the loop runs again.
02Where the power goes
Your geyser is the biggest line on your bill
A conventional electric geyser uses 50–60% of a typical household’s electricity. Moving that heat with a pump instead of making it with an element changes the whole bill.
01 — Share of the monthly bill
02 — Power draw while heating
03 — Annual running cost
That is roughly what your lights use.
03Choose your size
Two sizes. Same savings logic.
200 L IHP Water Heater
Households of 2–4 people
- Capacity
- 200 L
- Weight
- 106 kg
- Dimensions
- 620 × 1629 mm
- Heat pump
- 0.6 kW integrated
300 L IHP Water Heater
Larger families or high hot-water demand
- Capacity
- 300 L
- Weight
- 135 kg
- Dimensions
- 620 × 1894 mm
- Heat pump
- 0.6 kW integrated
0412 reasons
Why households switch
-
Up to 85% lower electricity use
Runs on 0.6 kW where a conventional element pulls 3–4 kW.
-
Save up to R26,000 in year one
Savings grow every time the electricity tariff goes up.
-
Hotter water
Heats water up to 75 °C.
-
Smart Wi-Fi control
Set temperature and schedules from the mobile app, anywhere.
-
10-year warranty
Long-term cover, backed by the manufacturer.
-
No bursts. No leaks.
Stainless steel construction with no ceiling-mounted tank.
-
Install almost anywhere
Ground level, garage, indoors or outdoors.
-
Safe to touch
Cool-touch, multi-layer insulated tank.
-
Integrated heat pump
One unit. No separate outdoor heat pump to mount.
-
Lower carbon footprint
Moves heat from the air instead of burning electricity.
-
Always-on hot water
Continuous heating instead of reheating in cycles.
-
Built-in 2 kW backup
An element steps in when demand peaks.
05Savings calculator
Estimate your saving
Move the sliders to match your household. The estimate uses the IHP Geyser’s up-to-85% reduction on the water-heating share of your bill.
Estimate only. Actual savings depend on hot-water use, tariff and climate. Ask us for a household assessment.
06Spec sheet
Technical specifications
- System
- Integrated heat pump
- Power supply
- 220–240 V
- Power consumption
- 0.6 kW
- Input current
- 2.93 A
- Backup element
- 2 kW
- Refrigerant
- R134a
- Compressor
- GMCC-Toshiba
- COP
- 4.11
- Connectivity
- Wi-Fi & smart app
- Casing
- Stainless steel
- Operating range
- −15 °C to 43 °C
- Certification
- IEC / SABS
07Before you install
Installation, simplified
Certified IOPSA IHP installers work nationwide. Installation vouchers are available at select retail partners as an optional add-on.
- Installed standing upright
- Outdoors on a flat, level surface is best
- A plug point within 4 m of the unit
- At least 2 m clearance above if covered, for maintenance
- Fitted by IOPSA-certified IHP installers, nationwide
- Pre-installation guide supplied so you know what to expect
08FAQ
Questions homeowners ask
IHP Geyser®
Why choose the Power4Less IHP Geyser®?
A conventional geyser accounts for 50–60% of a typical electricity bill. The IHP Geyser® brings water heating down to about 10% — roughly what your lights use — taking annual running costs from around R30,000 to about R2,000. It is engineered not to leak or burst, delivers up to 15 years of service with proper care, keeps water hot for longer through superior insulation, and is app-controlled from anywhere.
How does it actually work?
Instead of burning electricity in an element, a built-in fan draws in surrounding air. The system absorbs and compresses that heat, then transfers it straight into your water. The cycle repeats continuously on less than 600 W, compared with the 3,000–4,000 W of a traditional electric geyser. Same hot shower, a fraction of the cost.
What do I need for installation?
The unit stands upright, ideally outdoors on a flat, level surface, with a plug point within 4 m. If you shelter it under a cover, leave at least 2 m above the unit for maintenance. Certified IOPSA IHP installers work nationwide, and we supply a pre-installation guide. Installation vouchers are available at select retail partners — ask for the IOPSA installation terms when using one.
Which sizes are available?
Two: the 200 L model for households of 2–4 people, and the 300 L model for larger families or high hot-water demand. Sizes and weights may change slightly as model improvements are introduced.
Can any plumber install it?
We recommend IOPSA-certified IHP plumbers. They have completed specialised IOPSA training and certification specifically for installing the Power4Less IHP Geyser®, which protects both your installation and your warranty.
Does it work in winter?
Yes. The heat pump operates from −15 °C to 43 °C, and a built-in 2 kW backup element adds heat when demand is high.
No questions match that search. Ask us directly — we answer quickly.
Switch your geyser. Keep the hot shower.
Get a quote for a 200 L or 300 L IHP Geyser®, installed by IOPSA-certified plumbers.